Skip to content

Archive for

We Sold Our Jeep

1993 Jeep Wrangler

Boo hoo!

However, the thought of driving it back to Arizona from Bishop definitely played a part in our decision. 1993 Jeeps aren’t known for their comfortable drives. Plus, we really hadn’t been using it for a year. C’est la vie.

It was great fun! A moment of silence.

Since we sold the Jeep to a Californian, we had to go through the state-mandated SMOG testing. Argggh! Ask a Left Coaster about this. The test took most of a day, but luckily we didn’t need to have any “upgrades”.

When we ditch our Honda CRV in a few years, then we’ll look at another Jeep (something newer than a 1993).

Ariston Washer and Dryer Install

We’ve been spending about $80 to $100 per month doing our laundry.

That expense combined with the inconvenience of lugging baskets of clothes into funky laundromats made us investigate re-installing a washer/dryer in our RV.

Remember that we removed our non-functional Splenide washer/dryer a short while back (See Splendid(e) Deconstruction).

We found that there are not many washer/dryer options for RVs. Since most RVs only have 110 VAC, that rules out using household 220 VAC dryers. Also, we didn’t bother looking at propane dryers (or converting a natural gas dryer to propane). In addition, RVs don’t have a lot of space and that means many household units cannot be used.

Anyway, we finally settled on an Ariston washer and dryer which are designed specifically for RVs. Ariston is a Splendide brand. Our old Splendide was a combo washer and dryer — it washed and dried clothes. However, after checking around it seemed like a better idea to get a separate washer and dryer . . . and we had the space:



The new Ariston washer could fit in the same space as our old Splendide. Plus, the space was already plumbed for a washer.

The new Ariston dryer could fit in the space above our old washer. This space used to have shelves and we used it as a linen closet. However, the floor under the new dryer was not strong enough. It was just 1/4” Corian.

So we reinforced the floor under the new dryer with a sheet of 3/4” plywood:

Reinforced Dryer Floor

Also, we installed accessible hot and cold shutoff valves to the washer. Otherwise, we would have to shut off all water in the RV in order to service the new washer. We used SharkBite to connect to our RV’s PEX plumbing. Though SharkBite fittings are expensive, they are far easier to use than PEX ring fittings.

Next, we had to relocate the previous dryer vent hole. So we plugged the old vent hole and drilled a new one:

New & Old Dryer Vent Holes

New and Old Dryer Vent Holes

In addition, we secured both the washer and dryer to the RV using special “anchors” available from Ariston:

Finally, both dryer and washer were connected to power and water:



We’ve only had the new Ariston washer and dryer up and running for a few days, but it looks like we made the right decision.

We’ll have an update later on how it’s working out.